CCNP Switch Version 2.0 (300-115)


This course includes

  • 14 hours on-demand video
  • Full lifetime access
  • Access on mobile and TV
  • Certificate of Completion

What you'll learn

  • Enables you to succeed on the exam the first time
  • Helping you to identify areas of weakness and improve both your conceptual knowledge and hands-on skills.
  • To plan, operate and troubleshoot complex, converged network infrastructures on a wide variety of Cisco equipment.
  • get skills to configure, manage and troubleshoot LAN, WAN with Expand on IPv6, and Cisco StackWise, VSS, and DMVPN technologies.


  • Good understanding on CCNA Routing and Switching Knowledge


  • Implementing Cisco IP Switched Networks (SWITCH 300-115) is a qualifying exam for the Cisco CCNP Routing and Switching and CCDP certifications.
  • Trained by expert Triple CCIE certified with 15 + years of training and working experience in production networks.
  • Covers Topics as per the Blueprint (In-depth Core Technology Training)
  • Provided with all Virtual Software's required for Lab
  • Detailed Workbook free access to anyone (Includes presentations, Labs documented with Outputs & Mock labs)
  • Access to Pre-recorded Video recordings Over 158 lectures and 32 hours of content!
  • The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture.

Who this course is for:

  • Students who want to prepare for CCNP switch exams.
  • Career-advancement opportunities

How to get your own copy of Video access

  • To get a copy of video Online Access, please send mail us at
  • You can also contact us on the following numbers if any queries
  • WhatsApp - +91 9985048840, +91 – 7036826345

CCNP Switch Content s

Over 75 lectures and 14 hours of content!

Section 1: Basic Switching

  • How Switch learns MAC
  • Broadcast Domain & Collision Domain
  • switch basic Configuration
  • ARP resolution WAN
  • CEF
  • CDP
  • LLDP

Section 2: Vlan Trunks

  • Vlan introduction
  • Static vlan
  • Dynamic vlan
  • Trunking
  • Trunking lab
  • Extended and voice vlan
  • Native VLAN

Section 3: Inter Vlan routing

  • Inter vlan routing legacy
  • Inter vlan routing subinterfaces
  • Inter vlan routing mls

Section 4: Vlan trunking Protocol

  • VTP
  • Verify VTP lab pre-requirments
  • VTP configuration
  • VTP pruning
  • VTP prune list and manual pruning

Section 5: VTP version 3

  • VTP version 3 overview
  • VTP version 3 lab-Verify VLAN
  • VTP version 3 lab-verify MSTP-Private VLAN

Section 6: Spanning tree Protocol

  • How STP works
  • How STP works 2
  • Campus model
  • Selecting Root bridge
  • Tuning STP Cost-priority and timers

Section 7: Optimizing STP

  • Etherchannel
  • Spaning tree portfast
  • BPdu gaurd and filter
  • BPDU guard lab
  • Root guard
  • loopguard
  • UDLD
  • Errdisable recovery

Section 8: STP Flavors

  • Uplink backbone fast
  • RSTP
  • Rstp lab
  • Pvst
  • MSTP introduction
  • MSTP lab
  • Tuning MSTP port proirty- cost

Section 9: SPAN-RSPAN

  • Span Introduction
  • Span example2
  • Rspan1
  • Rspan2
  • SPAN conditions and Restrictions

Section 10: First Hop Redundancy

  • First Hop Redundancy _ introduction
  • FHRP protocols differences
  • HSRP lab - Basic
  • HSRP lab - Advance Options
  • HSRP load sharing using Multiple groups
  • VRRP- Lab
  • GLBP - lab
  • GLBP - Track and load balancing

Section 11: Device Access security

  • login authentication
  • External authentication using AAA
  • External sever based Authentication –LAB

 Section 12: layer 2 Security

  • layer 2 security-Introduction
  • Mac flooding attack-Portsecurity
  • MAC spoofing- Port security
  • LAB-port-security
  • DHCP spoofing attack- DHCP snooping
  • LAB-DHCP snooping
  • IP spoofing attack - IP source Guard
  • LAB- IP source Guard
  • Arp spoofing- DAI
  • LAB Dynamic ARP inspection
  • storm control
  • Private VLAN
  • LAB – Private VLAN


 Exam Description:

Troubleshooting and Maintaining Cisco IP Networks v2 (TSHOOT 300-135) is a 120-minute qualifying exam with 15‒25 questions for the Cisco CCNP certification. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to

  • Plan and perform regular maintenance on complex enterprise routed and switched networks
  • Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting

The following topics are general guidelines for the content that is likely to be included on the exam.
However, other related topics may also appear on any specific version of the exam. To better reflect the contents of the exam and for clarity, the following guidelines may change at any time without notice.

5%  1.0  Network Principles

1.1  Use Cisco IOS troubleshooting tools
1.1.a  Debug, conditional debug
1.1.b  Ping and trace route with extended options
1.2    Apply troubleshooting methodologies 
1.2.a  Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b  Design and implement valid solutions
1.2.c  Verify and monitor resolution

40%  2.0  Layer 2 Technologies

2.1  Troubleshoot switch administration
2.1.a   SDM templates
2.1.b   Managing MAC address table 
2.1.c  Troubleshoot Err-disable recovery
2.2  Troubleshoot Layer 2 protocols
2.2.a   CDP, LLDP
2.2.b   UDLD
2.3  Troubleshoot VLANs
2.3.a   Access ports
2.3.b   VLAN database
2.3.c  Normal, extended VLAN, voice VLAN
2.4  Troubleshoot trunking
2.4.a   VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b   dot1Q 
2.4.c  Native VLAN
2.4.d  Manual pruning
2.5  Troubleshoot EtherChannels
2.5.a   LACP, PAgP, manual
2.5.b   Layer 2, Layer 3
2.5.c  Load balancing
2.5.d  EtherChannel misconfiguration guard
2.6  Troubleshoot spanning tree
2.6.a   PVST+, RPVST +, MST
2.6.b   Switch priority, port priority, path cost, STP timers
2.6.c  PortFast, BPDUguard, BPDUfilter
2.6.d  Loopguard, Rootguard
2.7  Troubleshoot other LAN switching technologies
2.7.a   SPAN, RSPAN
2.8  Troubleshoot chassis virtualization and aggregation technologies
2.8.a   Stackwise

40%  3.0  Layer 3 Technologies

3.1    Troubleshoot IPv4 addressing and subnetting
3.1.a  Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b  ARP
3.1.c  DHCP relay and server 
3.1.d  DHCP protocol operations
3.2    Troubleshoot IPv6 addressing and subnetting
3.2.a  Unicast
3.2.b  EUI-64
3.2.c  ND, RS/RA
3.2.d  Autoconfig (SLAAC)
3.2.e  DHCP relay and server 
3.2.f  DHCP protocol operations
3.3    Troubleshoot static routing
3.4    Troubleshoot default routing
3.5    Troubleshoot administrative distance
3.6    Troubleshoot passive interfaces
3.7    Troubleshoot VRF lite
3.8    Troubleshoot filtering with any protocol
3.9    Troubleshoot between any routing protocols or routing sources
3.10 Troubleshoot manual and auto summarization with any routing protocol
3.11 Troubleshoot policy-based routing
3.12 Troubleshoot suboptimal routing
3.13 Troubleshoot loop prevention mechanisms
3.13.a  Route tagging, filtering
3.13.b  Split-horizon
3.13.c  Route poisoning
3.14 Troubleshoot RIPv2
3.15 Troubleshoot EIGRP neighbor relationship and authentication
3.16 Troubleshoot loop free path selection
3.16.a  RD, FD, FC, successor, feasible successor
3.17 Troubleshoot EIGPR operations
3.17.a  Stuck in active
3.18 Troubleshoot EIGRP stubs
3.19 Troubleshoot EIGRP load balancing
3.19.a  Equal cost
3.19.b  Unequal cost
3.20  Troubleshoot EIGRP metrics
3.21  Troubleshoot EIGRP for IPv6
3.22  Troubleshoot OSPF neighbor relationship and authentication
3.23  Troubleshoot network types, area types, and router types
3.23.a  Point-to-point, multipoint, broadcast, nonbroadcast
3.23.b  LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.23.c  Internal router, backbone router, ABR, ASBR
3.23.d  Virtual link
3.24  Troubleshoot OSPF path preference
3.25  Troubleshoot OSPF  operations
3.26  Troubleshoot OSPF for IPv6
3.27  Troubleshoot BGP peer relationships and authentication 
3.27.a  Peer group
3.27.b  Active, passive
3.27.c  States and timers
3.28 TroubleshooteBGP
3.28.a  eBGP
3.28.b  4-byte AS number
3.28.c  Private AS
5%  4.0  VPN Technologies
4.1  Troubleshoot GRE
5%  5.0  Infrastructure Security
5.1    Troubleshoot IOS AAA using local database 
5.2    Troubleshoot device access control
5.2.a  Lines (VTY, AUX, console)
5.2.b  Management plane protection
5.2.c  Password encryption
5.3    Troubleshoot router security features
5.3.a  IPv4 access control lists (standard, extended, time-based)
5.3.b  IPv6 traffic filter
5.3.c  Unicast reverse path forwarding

5%  6.0  Infrastructure Services

6.1  Troubleshoot device management
6.1.a   Console and VTY
6.1.b  Telnet, HTTP, HTTPS, SSH, SCP
6.1.c  (T)FTP
6.2  Troubleshoot SNMP
6.2.a  v2
6.2.b  v3
6.3  Troubleshoot logging
6.3.a  Local logging, syslog, debugs, conditional debugs
6.3.b  Timestamps
6.4  Troubleshoot Network Time Protocol(NTP)
6.4.a  NTP master, client, version 3, version 4
6.4.b  NTP authentication
6.5  Troubleshoot IPv4 and IPv6 DHCP
6.5.a  DHCP client, IOS DHCP server, DHCP relay
6.5.b  DHCP options (describe)
6.6  Troubleshoot IPv4 Network Address Translation (NAT)
6.6.a  Static NAT, Dynamic NAT, PAT
6.7  Troubleshoot SLA architecture
6.8  Troubleshoot tracking objects
6.8.a  Tracking objects
6.8.b  Tracking different entities (for example, interfaces, IPSLA results)