http://www.noasolutions.com/
http://www.noasolutions.com/

CCNA 200-301 ( new updated FEB 2020)

CCNA 200-301 is a 120-minute exam that replaces all current CCNA exams with only a single exam effective Feb. 24, 2020.
In order to keep up with the fast-paced IT world, Cisco is restructuring their certs.
These changes are coming in early 2020, so it’s a good idea to start preparing for them.
To earn the new CCNA, you only need to complete one exam, due to go live on Feb 24, 2020.
This new exam (200-301 CCNA) will cover a wide range of networking, security, automation, and programmability topics.

CCNA 200-301 exam includes a significant amount of

  • Network Fundamentals  ( TCP/UDP/ cabling types)
  • IPv4 and IPv6 Addressing / Subnetting
  • Virtualization fundamentals
  • Routing protocols ( OSPF , EIGRP )  IPv4/IPv6
  • IP Services  ( NAT/DHCP/SSH/Qos/syslog/NTP etc)
  • Wireless LAN technologies /Architectures
  • Security Fundamentals ( ACL , Device security, L2 Security / wireless security)
  • Network Automation  & programmability (SDN, API)

Cisco has enabled programmable features on their devices and virtualization from physical equipment to software services.
 They have virtual appliances and CCNA engineers now support private and cloud data center connections

COURSES

Currently we are offering the below Courses in Video Trainings. You can also find some sample Videos at our YouTube Channel.

Section 1 - Introduction

  • How to study for CCNA
  • How to study Networking
  • How to build a CCNA Lab
  • What is Networking

Section -2 Network Fundamentals

  • Introduction to the OSI Model
  • Introduction to IPv4 (Internet Protocol)
  • IPv4 Packet Header
  • Address Resolution Protocol (ARP)
  • Introduction to TCP and UDP
  • TCP Header
  • TCP Window Size Scaling
  • Introduction to ICMP
  • Introduction to DNS
  • Introduction to Cisco Command Line Interface (CLI)
  • User mode and Privileged mode

Section 3: Network Access
3.1 LAN

  • Introduction to LANs
  • Introduction to Ethernet
  • Collision Domains
  • Broadcast Domains
  • How a switch learns MAC addresses
  • Power over Ethernet (PoE)
  • Cisco Campus Network Design
  • Network Topologies
  • Troubleshooting Interfaces

3.2 VLANs and Trunks

  • Introduction to VLANs
  • How to configure VLANs
  • VLAN Trunking Protocol (VTP)
  • Introduction to 802.1Q
  • How to configure a Trunk
  • Dynamic Trunking Protocol (DTP)
  • 802.1Q Native VLAN
  • Introduction to Voice VLAN
  • Etherchannels
  • L3 Etherchannel

3.3 Spanning-Tree

  • Introduction to Spanning-Tree
  • Per VLAN Spanning-Tree
  • Spanning-Tree Port States
  • Spanning-Tree Cost Calculation
  • Spanning-Tree Portfast
  • Rapid PVST
  • Rapid PVST Configuration

3.4 Wireless

  • Introduction to Wireless Networks
  • Introduction to Wireless LANs
  • Section 4: IP Connectivity

Section – 4 – IP Connectivity & Routing
4.1 Introduction

  • Introduction to Routers and Routing
  • Cisco IOS Router Basic Configuration
  • Introduction to Wide Area Networks (WAN)

4.2 IPv4 Subnetting

  • Introduction to Subnetting
  • Basics of Binary Numbers
  • Subnetting in Binary
  • Subnetting in Decimal (Fast Method)
  • Classless InterDomain Routing (CIDR)
  • Variable Length Subnet Mask (VLSM)
  • Route Summarization
  • Hexadecimal to Binary and Decimal Conversion
  • Create a Subnetting Cheat Sheet

4.3 IPv6

  • Introduction to IPv6
  • Shortening IPv6 Addresses
  • How to find IPv6 Prefix
  • IPv6 Address Types
  • IPv6 Address Assignment Example
  • IPv6 EUI-64
  • IPv6 Summarization
  • IPv6 Solicited Node Multicast Address
  • IPv6 Neighbor Discovery Protocol (NDP)
  • IPv6 Stateless Auto configuration

4.4 Routing

  • Default Gateway
  • Static Routing
  • IPv6 Static Route
  • IP Routing Explained
  • Router on a Stick
  • InterVLAN Routing
  • Administrative Distance
  • Floating Static Route
  • Introduction to Route Summarization

4.5 OSPF

  • Introduction to OSPF
  • OSPF Configuration
  • OSPF Packets and Neighbor Discovery
  • OSPF Reference Bandwidth
  • OSPF Router ID
  • OSPF DR/BDR Election
  • OSPF Passive Interface
  • OSPF Hello and Dead Interval
  • 4.6 Gateway Redundancy
  • Introduction to Gateway Redundancy

Section 5: IP Services
5.1 DHCP

  • Introduction to DHCP
  • DHCP Server Configuration
  • DHCP Relay Agent
  • DHCP Client
  • DHCP Server IPv6 Configuration

5.2 SNMP

  • Introduction to SNMP
  • SNMPv2
  • SNMPv3

5.3 NAT

  • Introduction to NAT and PAT
  • NAT Static
  • NAT Dynamic
  • Port Address Translation (PAT)

5.4 Quality of Service (QoS)

  • Introduction to Quality of Service (QoS)
  • IP Precedence and DSCP Values
  • Classification
  • Marking
  • Shaping
  • Policing

Section 6: Security Fundamentals
6.1 Access-Lists

  • Introduction to Access-Lists
  • Wildcard Bits
  • Standard Access-List
  • Extended Access-List
  • Time-based Access-List

6.2 Misc

  • Port-Security
  • AAA and 802.1X
  • AAA User Authentication
  • AAA Admin Authentication
  • DHCP Snooping
  • Introduction to Firewalls
  • Introduction to VPNs

Section 7: Network Management

  • Introduction to CDP
  • Introduction to LLDP
  • Telnet Server and Client
  • SSH Server and Client
  • Introduction to NTP
  • Introduction to Syslog
  • Configuration Register
  • Password Recovery on Cisco IOS
  • Cisco IOS Filesystem
  • Upgrade Cisco IOS Image

Section 8: Automation and Programmability

  • Device Programmability
  • REST API
  • Data Models and Structures
  • Configuration Management Tools and Version Control Systems
  • Introduction to Software Defined Networking (SDN)
  • Spine and Leaf Architecture

Section 9: Cloud Computing

  • Virtual Machines and Containers
  • Introduction to Cloud Computing